How To Level The Portable Folding Bed Is Very Simple

　　A portable folding bed is used in our daily life. Many people still can't operate the recliner. Today, we will follow the folding chair manufacturer.

　　Let's learn how to level the portable folding bed.

　　How to flatten the portable folding bed is very simple!

　　A portable folding bed how flat?

　　Just hold the armrest and push the backrest back directly. When used as a chair, just stand up the back part, and if you want to lie down, put down the back part and fix it.

　　1. The recliner has a simple structure, generally consisting of a seat surface and a backrest. Some portable folding beds have a special armrest design, while others have no armrest design. Its folding part is the part where the seat surface is used as the backrest.

　　2. Different styles of portable folding beds have different ways of opening. Generally, our common portable folding beds are Chinese style, Southeast Asian style, Mediterranean style, etc. Like our Chinese-style portable folding bed, it may be three-stage, so the opening should start with the pull rings on both sides of the recliner, and then the middle part should be pulled out, and the length and width of the recliner should be adjusted according to the height of the human body.

　　Second, how do maintain the portable folding bed?

　　1. It is recommended to place it in an appropriate temperature and humidity environment, so as not to destroy the natural color of the wood surface. If there is a lot of dust, you can wipe it once with a neutral detergent diluted in warm water, and then rinse it with water. Wipe off all remaining water stains with a dry cloth, and then wipe with maintenance wax after a thorough cleaning. If you pay attention to daily cleaning and maintenance, you can make the furniture last longer.

　　2. Use less cloth and less water, then use neutral detergent, and then dip a clean soft cloth in a little water to reduce frequent cleaning. You can carefully clean it with liquid detergent, or you can use lemon juice or vinegar to clean stains, but the lemon should be left for at least 2 minutes. If necessary, you can repeat the work, then clean and dry.

　　3. Regularly remove dust. Dust was flying outdoors, and the dust floating on the wrought iron folding chair fell off. This layer of dust will affect the color of wrought iron and damage its protective film, so it is usually recommended to wipe it with a soft side because outdoor iron facilities must be cleaned regularly.

　　4. Please pay attention to moistureproofing. If the outdoor air is generally humid, we can guarantee the rust prevention of wrought iron facilities. In foggy weather, please use a dry cloth to wipe the water drops from the soldering iron. If it rains, then the water droplets must be dried in time after it rains.